BeagleBone Black Rev C

$99.95

Out of stock

Notify me when item is back in stock.

SKU: BEA-BLA-REV Category:

Description

Description:

The Beagle Bone Black (BBONE-BLACK-4G) is a low cost, high-expansion focused BeagleBoard using a low cost Sitara™ AM3358 ARM® Cortex™-A8 processor from Texas Instruments. The unit comes with the Linux distribution Ångström preinstalled on the onboard 4GB FLASH, ready to start evaluation and development.

The board itself boots Linux in under 10 seconds and the user can get started on development in less than 5 minutes with just a single USB cable.

Many other Linux distributions and operating systems are also supported by BeagleBone Black including Ubuntu, Android, and Fedora. Like its predecessors, the BeagleBone Black is designed to address the Open Source Community, early adopters, and anyone interested in a low-cost ARM® Cortex™-A8 based processor.

It has been equipped with a minimum set of features to allow the user to experience the power of the processor and also offers access to many of the interfaces and allows for the use of add-on boards called capes, to add many different combinations of features.

 

Features:

  • USB client for power and communication
  • USB host
  • Ethernet and HDMI interface
  • 512MB DDR3 RAM
  • Cortex A8 ARM
  • 4GB 8bit eMMC onboard flash storage
  • Optional onboard 20 pin CTU JTAG, serial header
  • Most BeagleBone capes are cross compatible
  • 3D graphics accelerator
  • Neaon floating-point accelerator
  • 2x PRU 32-bit microcontrollers
  • 2x 46 headers for cape connectivity

 

Contents:

  • 1x BEAGLEBONE BLACK REV C, CORTEX A8 1GHz CPU, 4GB Flash 8bit eMMC Storage, 512 RAM

Additional information

Brand

Model

MPN

RAM

Internal Flash Memory

CPU

UPC

Customer reviews

5 stars 0 0 %
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may write a review.

Someone in BLACK ROCK bought a
5mW 650nm Red Dot Laser Module Focus Adjustable Laser Head 5V Industrial Grade + 3 Items
about 10 hours ago
 
Someone in BELROSE bought a
Raspberry Pi 3 Model B+
about 12 hours ago
 
Someone in ELIZABETH bought a
Sensor Expansion Board Shield V5.0 - Arduino Compatible
about 12 hours ago
 
Someone in AXEDALE bought a
DC-DC 6-24V to 5V 3A Car USB Charger Module Buck / Step down Converter
about 18 hours ago
 
Someone in KALEEN bought a
Raspberry Pi 3 Model B+
about 1 day ago
 
Someone in KEW bought a
Arduino Nano 3.0 Atmel ATmega328 Mini-USB Board
about 1 day ago
 
Someone in PORT MACQUARIE bought a
High Accuracy DS3231 RTC & EEPROM
about 2 days ago
 
Someone in KEILOR DOWNS bought a
Arduino Nano 3.0 Atmel ATmega328 Mini-USB Board + 1 Item
about 2 days ago
 
Someone in ADELAIDE bought a
15 Pin SATA Female to Molex IDE 4 Pin Male Power Adapter Extension Cable
about 3 days ago
 
Someone in SYDNEY bought a
Raspberry Pi Zero 4 In 1 Case Starter Kit Case Heat Sink GPIO Header Pins - Solid Black
about 3 days ago
 
Share This
X