Description:
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
Connect your next Arduino project with an adorable microcontroller at a very affordable price! This WI-Fi module is part of ESP8266 series which is a high-performance wireless System On a Chip (SOC). It is designed for minimal space requirement and offers a complete and standalone WI-Fi networking solution at the lowest possible cost. It can be used to host the application or to offload Wi-Fi networking functions from another application processor.
ESP-01 is one of the most popular Wi-Fi modules in the market that have onboard printed antenna and header block for easy access to pin-outs. It has 2 GPIO Pins (GPIO 0 and GPIO 2). Is has a small form factor (15mm x 15mm) and fits nicely in compact spaces. The module comes with one of the different version of the AT firmware which allows it to work effortlessly with platforms like Arduino.
Features:
- 802.11 b/g/n
- Integrated low power 32-bit MCU
- Integrated 10-bit ADC
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, and power management units
- Supports antenna diversity
- Wi-Fi 2.4 GHz, support WPA/WPA2
- Support STA/AP/STA+AP operation modes
- Support Smart Link Function for both Android and iOS devices
- Support Smart Link Function for both Android and iOS devices
- SDIO 2.0, (H) SPI, UART, I2C, I2S, IRDA, PWM, GPIO
- STBC, 1×1 MIMO, 2×1 MIMO
- A-MPDU & A-MSDU aggregation and 0.4s guard interval
- Deep sleep power <10uA, Power-down leakage current < 5uA
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
- +20dBm output power in 802.11b mode
- Operating temperature range -40C ~ 125C
- 2 GPIO (0 and 2)
- Wifi b/g/n support
Specifications:
- Wi-Fi Parameters
- Wi-Fi Protocols: 802.11 b/g/n
- Frequency Range: 2.4GHz-2.5GHz (2400M-2483.5M)
- Hardware Parameters
- Peripheral Bus: UART/HSPI/I2C/I2S/Ir Remote Control
- Operating Voltage: 3.0~3.6V
- Operating Current: Average value: 80mA
- Operating Temperature Range: -40°~125°
- Ambient Temperature Range: Normal temperature
- Package Size: 14.3mm*24.8mm*3mm
- Software Parameters
- Wi-Fi mode: station/softAP/SoftAP+station
- Security: WPA/WPA2
- Encryption: WEP/TKIP/AES
- Firmware Upgrade: UART Download / OTA (via network) / download and write firmware via host
- Software Development: Supports Cloud Server Development / SDK for custom firmware development
- Network Protocols: IPv4, TCP/UDP/HTTP/FTP
- User Configuration: AT Instruction Set, Cloud Server, Android/iOS App
- Serial/UART baud rate: 115200 bps
- Input power: 3.3V
- I/O voltage tolerance: 3.6V Max
- Flash Memory Size: 8Mbit external QSPI flash memory (1MByte)
- WiFi security modes: WPA, WPA2
- Weight: 1.5g
- Dimensions: 14.3 x 24.8mm
Contents:
- 1 x ESP8266 ESP-01 Remote Serial Port Wi-Fi Wireless Module
Reviews
There are no reviews yet.