Phipps Electronics

Order within the next 

FREE SHIPPING OVER $199

50,000+ ORDERS

WORLDWIDE SHIPPING

SSL SECURED

ESP8266 ESP-12F WiFi Module

32 people have recently viewed this product!

ESP8266 ESP-12F WiFi Module

This Wi-Fi module is part of ESP8266 series which is a high-performance wireless System On a Chip (SOC). It is designed for minimal space requirement and offers a complete and standalone Wi-Fi networking solution.

$13.95

Order Within –

Availability: 56 in stock

All stock is located in Australia.

FREE SHIPPING Worldwide on orders $199+

EXPRESS SHIPPING Available.

SKU: PHI1001872

Description:

Connect your next Arduino project with an adorable microcontroller at a very affordable price! This Wi-Fi module is part of ESP8266 series which is a high-performance wireless System On a Chip (SOC). It is designed for minimal space requirement and offers a complete and standalone Wi-Fi networking solution at the lowest possible cost. It can be used to host the application or to offload Wi-Fi networking functions from another application processor. It has an onboard PCB antenna and 9 GPIOs + ADC.

ESP-12F is an upgrade based on ESP-12E and has 22 pin counts. The revised antenna design increased communication distance by 30%-50% 16 pin counts. It is also FCC, CE and RoHS approved module is fully compatible with previous versions of ESP-12 series.

 

Pin Configuration:

  • RST – Reset the module
  • ADC – A/D Conversion result. Input voltage range 0-1v,scope:0-1024
  • EN – Chip enable pin. Active high
  • GPIO16 – GPIO16; can be used to wake up the chipset from deep sleep mode
  • GPIO14 – GPIO14; HSPI_CLK
  • GPIO12 – GPIO12; HSPI_MISO
  • GPIO13 – GPIO13; HSPI_MOSI; UART0_CTS
  • VCC – 3.3V power supply (VDD)
  • CS0 – Chip selection
  • MISO – Salve output Main input
  • IO9 – GPIO9
  • IO10 – GBIO10
  • MOSI – Main output slave input
  • SCLK – Clock
  • GND – GND
  • GPIO15 – GPIO15; MTDO; HSPICS; UART0_RTS
  • GPIO2 – GPIO2; UART1_TXD
  • GPIO0 – GPIO0
  • GPIO4 – GPIO4
  • GPIO5 – GPIO5
  • RXD – UART0_RXD; GPIO3
  • TXD – UART0_TXD; GPIO1

 

Features:

  • 802.11 b/g/n
  • Integrated low power 32-bit MCU
  • Integrated 10-bit ADC
  • Integrated TCP/IP protocol stack
  • Integrated TR switch, balun, LNA, power amplifier and matching network
  • Integrated PLL, regulators, and power management units
  • Supports antenna diversity
  • Wi-Fi 2.4 GHz, support WPA/WPA2
  • Support STA/AP/STA+AP operation modes
  • Support Smart Link Function for both Android and iOS devices
  • SDIO 2.0, (H) SPI, UART, I2C, I2S, IRDA, PWM, GPIO
  • STBC, 1×1 MIMO, 2×1 MIMO
  • A-MPDU & A-MSDU aggregation and 0.4s guard interval
  • Deep sleep power <10uA, Power-down leakage current < 5uA
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (DTIM3)
  • +20dBm output power in 802.11b mode
  • Operating temperature range -40C ~ 125C
  • FCC, CE, and ROSH certified

 

Specifications:

  • Wi-Fi Parameters
    • Certificates: FCC/CE/ROSH
    • Wi-Fi Protocols: 802.11 b/g/n
    • Frequency Range: 2.4GHz-2.5GHz (2400M-2483.5M)
  • Hardware Parameters
    • Peripheral Bus: UART/HSPI/I2C/I2S/Ir Remote Control; GPIO/PWM
    • Operating Voltage: 3.0~3.6V
    • Operating Current: Average value: 80mA
    • Operating Temperature Range: -40°~125°
    • Ambient Temperature Range: Normal temperature
    • Package Size: 16mm*24mm*3mm
  • Software Parameters
    • Wi-Fi mode: station/softAP/SoftAP+station
    • Security: WPA/WPA2
    • Encryption: WEP/TKIP/AES
    • Firmware Upgrade: UART Download / OTA (via network) / download and write firmware via host
    • Software Development: Supports Cloud Server Development / SDK for custom firmware development
    • Network Protocols: IPv4, TCP/UDP/HTTP/FTP
    • User Configuration: AT Instruction Set, Cloud Server, Android/iOS App

 

Contents:

  • 1x ESP8266 ESP-12F WiFi Module
Weight 0.002 kg
Dimensions 75 × 5 × 50 mm

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “ESP8266 ESP-12F WiFi Module”

Use one of the allowed file type: jpg,png. The max size allowed is : 10 MB.

    Can’t find the information you are looking for? Click Here to Contact Us

    Australian Orders

    We ship Australia-wide to all addresses, including PO Box, Parcel Locker, etc. The following shipping options available are listed below: 

    • Standard Shipping – Free (low cost / small products orders under $35 AUD) – Sent via standard Australia Post stamped mail, this shipping option has no tracking and support other than messages from Phipps Electronics to confirm the package has been dispatched to Australia Post.
    • Parcel Shipping (higher cost / larger products orders over $35 AUD or Postage paid at checkout) – Sent via Australia Post Parcel Service or Courier Service, this shipping option has full tracking.
    • Express Post – Sent via Australia Post Express Service, this shipping option has full tracking.

    View the table below for shipping time estimates for Australian orders. These estimates are based on Australia Post's recent delivery performance and do not take into account any current disruptions which may affect delivery time.

    StateStamped PostageParcel PostExpress Post
    NSWUp to 4 business days2 - 4 business days1 - 2 business days
    VIC3 - 6 business days3 - 5 business days2 - 3 business days
    QLD3 - 6 business days3 - 5 business days2 - 3 business days
    SA4 - 7 business days 4 - 6 business days2 - 3 business days
    WA6 - 12 business days6 - 8 business days2 - 3 business days
    TAS5 - 7 business days5 - 6 business days2 - 3 business days
    ACT3 - 6 business days2 - 4 business days1 - 2 business days
    NT7 - 12 business days7 - 10 business days3 - 4 business days

     

    New Zealand Orders

    We ship to New Zealand, to all addresses, including PO Boxes. Packages shipped to New Zealand are sent through Australia Post with 2 shipping options available.

    • Standard Parcel
    • Express Parcel

    View the table below for shipping time estimates for orders to New Zealand. These estimates are based on Australia Post's recent delivery performance and do not take into account any current disruptions which may affect delivery time.

    CountryStandard ParcelExpress Parcel
    New Zealand7 - 12 business days5 - 8 business days

     

    International Orders

    We ship to most countries worldwide, there may be limitations on the addresses they can be delivered based on each individual country. Orders are shipped by Australia Post, in the rare circumstance that Australia Post can't deliver to the selected country we will attempt to ship with another shipping service.

    View the link below for shipping time estimates. These estimates are based on Australis Post's recent delivery performance and do not take into account any current disruptions which may affect delivery time.

    CLICK HERE For Australia Post International Transit Times.


    If you have any questions, please have a look at the customer service portal where you will find answers to many common questions, or you can reach out to us through the contact us page.

    ESP8266 ESP-12F WiFi Module 2ESP8266 ESP-12F WiFi Module
    $13.95

    Availability: 56 in stock

    Scroll to Top