FTDI Basic Breakout Module – 5V with USB Cable

$9.95

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.

In stock

SKU: PHI-FTD-MOD Category:

Description

Description:

This is the newest revision of our FTDI Basic. We now use an SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.

The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target.

This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working.

This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!). Our Arduino Pro boards and LilyPads use this type of connector.

One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level). This board ship default to 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V.

 

Contents:

  • 1x USB-TTL 6 PIN 5V FTDI Module
  • 1x USB Cable

Customer reviews

5 stars 0 0 %
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may write a review.

Someone in STRATHFIELD SOUTH bought a
Arduino Nano 3.0 Atmel ATmega328 Mini-USB Board + 1 Item
about 10 hours ago
 
Someone in MT WAVERLEY bought a
Raspberry Pi 3 Model B+
about 11 hours ago
 
Someone in MELBOURNE bought a
5mW 650nm Red Line Laser Module Focus Adjustable Laser Head 5V Industrial Grade + 1 Item
about 11 hours ago
 
Someone in OAKLANDS PARK bought a
USB 3.0 TO GIGABIT RJ45 ETHERNET LAN ADAPTER 1000 MBPS PC & MAC
about 13 hours ago
 
Someone in GLENWOOD bought a
AM/FM Portable Radio with USB MP3 Player LED Torch 10 Hour Battery Life
about 16 hours ago
 
MT3608 Step-Up Adjustable DC-DC Switching Power Module Boost Converter
Someone in ALKIMOS bought a
MT3608 Step-Up Adjustable DC-DC Switching Power Module Boost Converter
about 21 hours ago
 
Someone in MAYFIELD WEST bought a
ST-Link V2 ST-Link Mini STM In-Circuit Programmer and Debugger for STM8 and STM32 – with Cover + 2 Items
about 24 hours ago
 
Someone in TURRAMURRA bought a
Arduino Nano 3.0 Atmel ATmega328 Mini-USB Board
about 1 day ago
 
Someone in MAROUBRA bought a
Raspberry Pi 3 Model B+
about 1 day ago
 
DHT22 Digital Temperature & Humidity Sensor
Someone in DARRA bought a
DHT22 Digital Temperature and Humidity Sensor AM2302 + 1 Item
about 1 day ago
 
Share This
X