HC-SR501 PIR Motion Detector Sensor Module Arduino Raspberry Pi HCSR501

$7.95

Motion Sensor is a Passive InfraRed (PIR) sensor module with automatic control.

In stock

SKU: PHI-MOT-HCS Category:

Description

HC-SR501 PIR Motion Detector Sensor Module Arduino Raspberry Pi HCSR501
This HC-SR501 Raspberry Pi & Arduino Motion Sensor is a Passive InfraRed (PIR) sensor module with automatic control. The module exhibits high sensitivity, high reliability with low power consumption.
The unit will detect human & animal targets up to ~8 meters distance.

Specifications:» Operating voltage range: DC 4.5-20V
» Quiescent Current: <50uA
» Level output: High 3.3 V /Low 0V» Trigger: L can not be repeated trigger/H can be repeated trigger(Default repeated trigger)
» Delay time: 5-200S(adjustable) the range is (0.xx second to tens of second) 
» Block time: 1S(default)Can be made a range(0.xx to tens of seconds 
» Board Dimensions: 32mm*24mm
» Angle Sensor: <100 ° cone angle
» Operation Temp: -15℃-+70℃
» Lens size sensor: Diameter:23mm(Default)
Features:The automatic sensor: to enter the sensor output range is high, people leave the sensor range of the automatic delay off high, output low.The photosensitive control (optional, factory is not set) may set the photosensitive control during the day or light intensity without induction.The temperature compensation (optional, factory is not set): In the summer when the ambient temperature rises to 30 ~ 32 ℃, slightly shorter detection range, temperature compensation can be used as a performance compensation.Two trigger mode: (can be selected by jumpers) a, can not repeat the trigger: the sensor output high, the delay time is over, the output will automatically become low from high; b, repeatable trigger: the sensor output high after the delay period, if the human body in its sensing range activities, its output will remain high until after the delay will be left high to low (sensor module review Measured activities of each body will be automatically extended after a delay time, and the final event of the delay time Starting point of time).With induction blocking time (the default setting: 2.5S block time): sensor module, after each sensor output (high change Into a low level),you can set up a blockade followed by time period, in this time period the sensor does not accept any sensor signal. This feature can have a “sensor output time” and “blocking time” the interval between the work produced can be applied to detect the interval Products; also inhibit this function during load switching for a variety of interference. (This time can be set at zero seconds – Tens of seconds).The working voltage range: the default voltage DC4.5V-20V.Micro-power consumption: static current “50 microamps, especially for battery-powered automatic control products.The output high level signals: types of circuits can be easily and docking.The working voltage range: the default voltage DC4.5V-20V.The working voltage range: the default voltage DC4.5V-20V.Contents:» 1x HC-SR501 PIR Motion Detector Sensor Module

Additional information

Brand

Model

MPN

UPC

Customer reviews

5 stars 0 0 %
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may write a review.

Someone in ADELAIDE bought a
15 Pin SATA Female to Molex IDE 4 Pin Male Power Adapter Extension Cable
about 12 hours ago
 
Someone in SYDNEY bought a
Raspberry Pi Zero 4 In 1 Case Starter Kit Case Heat Sink GPIO Header Pins - Solid Black
about 16 hours ago
 
Someone in LONGUEVILLE bought a
4x4 16 Key Matrix Membrane Keypad + 1 Item
about 19 hours ago
 
Someone in PARKDALE bought a
Bi-Directional IDE to SATA or SATA to IDE Converter
about 21 hours ago
 
Someone in FAIRY MEADOW bought a
ST-Link V2 ST-Link Mini STM In-Circuit Programmer and Debugger for STM8 and STM32 – with Cover
about 1 day ago
 
Someone in SYDNEY bought a
IC 2262 / 2272 4 Channel 315Mhz Wireless Remote Control Kit + 2 Items
about 1 day ago
 
Someone in COOBER PEDY bought a
Arduino Nano 3.0 Atmel ATmega328 Mini-USB Board
about 1 day ago
 
Someone in SYDNEY bought a
Bi-Directional IDE to SATA or SATA to IDE Converter
about 1 day ago
 
Someone in 300 BARANGAROO AVENUE, BARANGAROO bought a
AM/FM Portable Radio with USB MP3 Player LED Torch 10 Hour Battery Life
about 2 days ago
 
Someone in OSBORNE PARK bought a
Arduino Nano 3.0 Atmel ATmega328 Mini-USB Board
about 2 days ago
 
Share This
X