Phipps Electronics

Order within the next 

FREE SHIPPING OVER $199

50,000+ ORDERS

WORLDWIDE SHIPPING

SSL SECURED

LCR-T4 Digital Component Tester with 12846 LCD Display – M328

2 people have recently viewed this product!

LCR-T4 Digital Component Tester with 12846 LCD Display – M328

The LCR-T4 Digital Component Tester is designed to allow you to test Inductors, Capacitors, Diodes, Dual Diodes, MOS, Transistors, SCR, LED, ESR, Resistance, and Adjustable Potentiometer.

$25.95

Order Within –

Availability: Out of stock

Notify me via email when this product is back in stock.

All stock is located in Australia.

Notify me via email when this product is back in stock.

FREE SHIPPING Worldwide on orders $199+

EXPRESS SHIPPING Available.

SKU: PHI1001941

Description:

The LCR-T4 Digital Component Tester is designed to allow you to test Inductors, Capacitors, Diodes, Dual Diodes, MOS, Transistors, SCR, LED, ESR, Resistance, and Adjustable Potentiometer. The tester is powered by a 9V battery (Not Included) and comes equipped with a 12846 backlit LCD display.

 

Test Ranges:

  • Resistance: 0.1-ohm resolution, maximum 50M ohm
  • Capacitor: 25pf – 100,000 uf
  • Inductors: 0.01mh – 20H

 

Functions:

  • Add boot voltage detection function
  • Automatic detection of NPN and PNP transistors, N -channel and P-channel MOSFET, diodes ( including dual diode), thyristors, transistors, resistors and capacitors and other components
  • Automatic test out the pin element and displayed on the LCD
  • Can be detected to determine the transistor emitter forward bias voltage of the transistor, MOSFET protection diode and the amplification factor of the base
  • Measure the gate threshold voltage and gate capacitance of the MOSFET
  • 1602 LCD display uses LCD (12864 LCD with backlight)
  • High test speed, valid component test: 2 seconds (except in the larger capacitor of large capacitance measurement also takes a long time, the measured time of one minute is normal)
  • One button operation, power-on test, get a key.
  • Power consumption off mode: less than 20 nA
  • Auto power-off function to avoid unnecessary waste, saving battery power, improved battery life.

 

Specifications:

  • One -button operation, automatic shutdown.
  • 20nA shutdown current.
  • Automatically detect NPN, PNP bipolar transistors, N -channel, and P -channel MOS FET, JFET, diodes, two diodes, thyristors small power unidirectional and bidirectional thyristor.
  • Automatic identification components pin arrangement.
  • Measuring bipolar transistor current amplification factor and base-emitter threshold voltage.
  • Via the base-emitter threshold voltage and the high current amplification factor to identify Darlington transistors.
  • Can detect bipolar transistors and MOS transistors protection diodes.
  • Measuring the gate MOS FET threshold voltage and the gate capacitance.
  • Can simultaneously measure two resistors and resistor symbol is displayed. Displayed on the right with a decimal value of 4. Resistance symbol on both sides shows the pin number. So you can measure the potentiometer. If the potentiometer wiper is not transferred to an extreme position, we can distinguish the middle and both ends of the pin.
  • Resistance measurement resolution is 0.1 ohms, 50M ohms can be measured.
  • Can measure capacitance of 30pF-100mF, resolution 1pF.
  • 2uF more capacitors can simultaneously measure the equivalent series resistance ESR values. The two can be displayed with a decimal value, resolution 0.01 ohms.
  • Can be in the correct order and the diode symbol display two diodes, and gives the diode forward voltage.
  • LED is detected as a diode forward voltage higher. Combo of the LED is identified as two diodes.
  • Reverse breakdown voltage is less than 4.5V Zener diode can be identified.
  • Can measure a single diode reverse capacitance. If the bipolar transistor connected to the base and collector or emitter of a pin, it can measure the collector or emitter junction reverse capacitance.
  • can be obtained with a single measurement rectifier bridge connection.

 

Contents:

  • 1 x LCR-T4 Digital Component Tester with 12846 LCD Display – M328

 

*Note: Before measuring capacitance, make sure the capacitor is discharged, as it may cause damage to the hardware.

 

Weight 0.046 kg
Dimensions 150 × 15 × 100 mm

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “LCR-T4 Digital Component Tester with 12846 LCD Display – M328”

Use one of the allowed file type: jpg,png. The max size allowed is : 10 MB.

    Can’t find the information you are looking for? Click Here to Contact Us

    Australian Orders

    We ship Australia-wide to all addresses, including PO Box, Parcel Locker, etc. The following shipping options available are listed below: 

    • Standard Shipping – Free (low cost / small products orders under $35 AUD) – Sent via standard Australia Post stamped mail, this shipping option has no tracking and support other than messages from Phipps Electronics to confirm the package has been dispatched to Australia Post.
    • Parcel Shipping (higher cost / larger products orders over $35 AUD or Postage paid at checkout) – Sent via Australia Post Parcel Service or Courier Service, this shipping option has full tracking.
    • Express Post – Sent via Australia Post Express Service, this shipping option has full tracking.

    View the table below for shipping time estimates for Australian orders. These estimates are based on Australia Post's recent delivery performance and do not take into account any current disruptions which may affect delivery time.

    StateStamped PostageParcel PostExpress Post
    NSWUp to 4 business days2 - 4 business days1 - 2 business days
    VIC3 - 6 business days3 - 5 business days2 - 3 business days
    QLD3 - 6 business days3 - 5 business days2 - 3 business days
    SA4 - 7 business days 4 - 6 business days2 - 3 business days
    WA6 - 12 business days6 - 8 business days2 - 3 business days
    TAS5 - 7 business days5 - 6 business days2 - 3 business days
    ACT3 - 6 business days2 - 4 business days1 - 2 business days
    NT7 - 12 business days7 - 10 business days3 - 4 business days

     

    New Zealand Orders

    We ship to New Zealand, to all addresses, including PO Boxes. Packages shipped to New Zealand are sent through Australia Post with 2 shipping options available.

    • Standard Parcel
    • Express Parcel

    View the table below for shipping time estimates for orders to New Zealand. These estimates are based on Australia Post's recent delivery performance and do not take into account any current disruptions which may affect delivery time.

    CountryStandard ParcelExpress Parcel
    New Zealand7 - 12 business days5 - 8 business days

     

    International Orders

    We ship to most countries worldwide, there may be limitations on the addresses they can be delivered based on each individual country. Orders are shipped by Australia Post, in the rare circumstance that Australia Post can't deliver to the selected country we will attempt to ship with another shipping service.

    View the link below for shipping time estimates. These estimates are based on Australis Post's recent delivery performance and do not take into account any current disruptions which may affect delivery time.

    CLICK HERE For Australia Post International Transit Times.


    If you have any questions, please have a look at the customer service portal where you will find answers to many common questions, or you can reach out to us through the contact us page.

    Scroll to Top