Raspberry Pi T Junction GPIO Extension Board Kit
DescriptionSimplify connection between your Raspberry Pi and breadboard using this T-Cobbler breakout kit. This T-cobbler is specifically designed for Pi 2, Pi 3, or any 2x20 connector type. This will facilitate cobbling together your prototype, plus the printed PCB lets you build circuits without keeping a pin-out printout. read more
Simplify connection between your Raspberry Pi and breadboard using this T-Cobbler breakout kit. This T Junction is specifically designed for the Raspberry Pi or any 2×20 connector type. This will facilitate connection together with your prototype, plus the printed PCB lets you build circuits without keeping a pin-out printout.
Expand the fun possibilities you can build with your Pi embedded computer projects with the aid of this product. Definitely a must addition to your prototype kit!
- Wire length：19cm
- PCBA size：59*69*19mm
- PCBA colour：Black
- 1x 40 Pin GPIO Cable
- 1x GPIO T-Adapter Plate
Only logged in customers who have purchased this product may leave a review.
We ship Australia wide to all addresses, including PO Box, Parcel Locker, etc.
The following shipping options available are listed below:
- Standard Shipping – Free (low cost / small products) – Sent via standard Australia Post stamped mail, 3 – 7 business days delivery depending on location, minimal tracking.
- Standard Shipping – Free (higher cost / larger products) – Sent via Australia Post Parcel Service or Courier Service, depending on location and mailing address, 2 – 5 business days delivery, with full tracking.
- Express Post – $12.00 (Cost may be higher depending on product size) – Sent via Australia Post Express Service, 1 – 2 business days for metro orders, potentially longer for orders outside of metro zones, with full tracking.
Orders outside of metro orders can take 2+ days longer than the estimates stated above.
Shipping costs for international orders vary depending on location and package size, where possible we have kept this to flat rate charges to reduce confusion.
International orders are shipped through Australia Post and Sendle courier service depending on the most economical at the time.
In-person pickup is currently not available. If the order is urgent, please contact us to see what can be arranged.
If you have any questions, please have a look at the customer service portal where you will find answers to many common questions, or you can reach out to us through the contact us page.
If you would like more information regarding placing international orders, please view the faq page under the “Do you accept international orders?” section.
2.1mm DC Power Jack Socket – Pack of 2
$4.95 + Add to cart
ATMEGA328 MCU + 16MHZ Crystal + 22pF Capacitors + IC Socket Kit
$9.95 + Add to cart
Raspberry Pi Zero W Black Case with GPIO Header Pins and Heat Sink
$12.95 + Add to cart
2.54mm Pitch 40 Way Right Angled Male Pin Header – Pack of 5
$7.95 + Add to cart