SIM900 Quad-Band GPRS/GSM Shield Development Board for Arduino

$29.95

The GPRS/GSM shield allows an Arduino board to communicate using the GSM cell phone network.

Out of stock

Notify me when item is back in stock.

SKU: PHI-SIM-GPR-GSM Category:

Description

Description:

The GPRS/GSM shield allows an Arduino board to communicate using the GSM cell phone network. It allows an Arduino board to connect to the internet, send and receive SMS, and make outgoing and incoming voice calls. To illustrate, Arduino board perceives a GSM shield as a modem; while the GSM/mobile operator perceives a GSM shield as a mobile phone. This GPRS shield is based on SIM900 module, which is a complete Quad-band GSM/GPRS module and delivers GSM/GPRS 850/900/1800/1900MHz performance for voice, SMS, Data, and Fax in a small form factor and with low power consumption. Besides the communication features, this shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module present on-board.
The shield is compatible with the Arduino and with all boards which have the same form factor as a standard Arduino Board such as Mega, Mega ADK, Yun, and Leonardo boards. It is configured and controlled through UART using simple AT commands.

 

Features:

  • Will work on GSM networks in all countries across the world.
  • Compliant to GSM phase 2/2+
  • Easy control using AT commands
  • Enable sending SMS over the network
  • Allows uploading of data to a web server
  • RTC supported
  • Selectable serial port
  • With speaker and headphone jacks
  • Low power consumption

 

Specifications:

  • Quad-Band 850 / 900/ 1800 / 1900 MHz
  • GPRS multi-slot class 10/8
  • GPRS mobile station class B
  • Compliant to GSM phase 2/2+
    • Class 4 (2 W @ 850 / 900 MHz)
    • Class 1 (1 W @ 1800 / 1900MHz)
  • Control via AT commands
    • Standard Commands: GSM 07.07 & 07.05
    • Enhanced Commands: SIMCOM AT Commands
  • Short Message Service – send small amounts of data over the network (ASCII or raw hexadecimal).
  • Embedded TCP/UDP stack – upload data to a web server.
  • RTC supported.
  • Selectable serial port.
  • Speaker and Headphone jacks
  • Low power consumption – 1.5mA (sleep mode)
  • Industrial Temperature Range – -40°C to +85 °C
  • Size: 8.5×5.7x2cm (approx)

 

Contents:

  • 1 x SIM900 Quad-Band GPRS/GSM Shield Development Board for Arduino

Customer reviews

5 stars 0 0 %
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may write a review.

Someone in BLACK ROCK bought a
5mW 650nm Red Dot Laser Module Focus Adjustable Laser Head 5V Industrial Grade + 3 Items
about 9 hours ago
 
Someone in BELROSE bought a
Raspberry Pi 3 Model B+
about 12 hours ago
 
Someone in ELIZABETH bought a
Sensor Expansion Board Shield V5.0 - Arduino Compatible
about 12 hours ago
 
Someone in AXEDALE bought a
DC-DC 6-24V to 5V 3A Car USB Charger Module Buck / Step down Converter
about 18 hours ago
 
Someone in KALEEN bought a
Raspberry Pi 3 Model B+
about 1 day ago
 
Someone in KEW bought a
Arduino Nano 3.0 Atmel ATmega328 Mini-USB Board
about 1 day ago
 
Someone in PORT MACQUARIE bought a
High Accuracy DS3231 RTC & EEPROM
about 2 days ago
 
Someone in KEILOR DOWNS bought a
Arduino Nano 3.0 Atmel ATmega328 Mini-USB Board + 1 Item
about 2 days ago
 
Someone in ADELAIDE bought a
15 Pin SATA Female to Molex IDE 4 Pin Male Power Adapter Extension Cable
about 2 days ago
 
Someone in SYDNEY bought a
Raspberry Pi Zero 4 In 1 Case Starter Kit Case Heat Sink GPIO Header Pins - Solid Black
about 3 days ago
 
Share This
X