Phipps Electronics

Order within the next 

FREE SHIPPING OVER $199

50,000+ ORDERS

WORLDWIDE SHIPPING

SSL SECURED

SIM900 Quad-Band GPRS/GSM Shield Development Board for Arduino

2 people have recently viewed this product!

SIM900 Quad-Band GPRS/GSM Shield Development Board for Arduino

The GPRS/GSM shield allows an Arduino board to communicate using the GSM cell phone network.

This product is discontinued

Order Within –

Out of stock

Notify me via email when this product is back in stock.

All stock is located in Australia.

Notify me via email when this product is back in stock.

FREE SHIPPING Worldwide on orders $199+

EXPRESS SHIPPING Available.

SKU: PHI-SIM-GPR-GSM

Description:

The GPRS/GSM shield allows an Arduino board to communicate using the GSM cell phone network. It allows an Arduino board to connect to the internet, send and receive SMS, and make outgoing and incoming voice calls. To illustrate, Arduino board perceives a GSM shield as a modem; while the GSM/mobile operator perceives a GSM shield as a mobile phone. This GPRS shield is based on SIM900 module, which is a complete Quad-band GSM/GPRS module and delivers GSM/GPRS 850/900/1800/1900MHz performance for voice, SMS, Data, and Fax in a small form factor and with low power consumption. Besides the communication features, this shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module present on-board.
The shield is compatible with the Arduino and with all boards which have the same form factor as a standard Arduino Board such as Mega, Mega ADK, Yun, and Leonardo boards. It is configured and controlled through UART using simple AT commands.

 

Features:

  • Will work on GSM networks in all countries across the world.
  • Compliant to GSM phase 2/2+
  • Easy control using AT commands
  • Enable sending SMS over the network
  • Allows uploading of data to a web server
  • RTC supported
  • Selectable serial port
  • With speaker and headphone jacks
  • Low power consumption

 

Specifications:

  • Quad-Band 850 / 900/ 1800 / 1900 MHz
  • GPRS multi-slot class 10/8
  • GPRS mobile station class B
  • Compliant to GSM phase 2/2+
    • Class 4 (2 W @ 850 / 900 MHz)
    • Class 1 (1 W @ 1800 / 1900MHz)
  • Control via AT commands
    • Standard Commands: GSM 07.07 & 07.05
    • Enhanced Commands: SIMCOM AT Commands
  • Short Message Service – send small amounts of data over the network (ASCII or raw hexadecimal).
  • Embedded TCP/UDP stack – upload data to a web server.
  • RTC supported.
  • Selectable serial port.
  • Speaker and Headphone jacks
  • Low power consumption – 1.5mA (sleep mode)
  • Industrial Temperature Range – -40°C to +85 °C
  • Size: 8.5×5.7x2cm (approx)

 

Contents:

  • 1 x SIM900 Quad-Band GPRS/GSM Shield Development Board for Arduino

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “SIM900 Quad-Band GPRS/GSM Shield Development Board for Arduino”

Use one of the allowed file type: jpg,png. The max size allowed is : 10 MB.

    Can’t find the information you are looking for? Click Here to Contact Us

    Australian Orders

    We ship Australia-wide to all addresses, including PO Box, Parcel Locker, etc. The following shipping options available are listed below: 

    • Standard Shipping – Free (low cost / small products orders under $35 AUD) – Sent via standard Australia Post stamped mail, this shipping option has no tracking and support other than messages from Phipps Electronics to confirm the package has been dispatched to Australia Post.
    • Parcel Shipping (higher cost / larger products orders over $35 AUD or Postage paid at checkout) – Sent via Australia Post Parcel Service or Courier Service, this shipping option has full tracking.
    • Express Post – Sent via Australia Post Express Service, this shipping option has full tracking.

    View the table below for shipping time estimates for Australian orders. These estimates are based on Australia Post's recent delivery performance and do not take into account any current disruptions which may affect delivery time.

    StateStamped PostageParcel PostExpress Post
    NSWUp to 4 business days2 - 4 business days1 - 2 business days
    VIC3 - 6 business days3 - 5 business days2 - 3 business days
    QLD3 - 6 business days3 - 5 business days2 - 3 business days
    SA4 - 7 business days 4 - 6 business days2 - 3 business days
    WA6 - 12 business days6 - 8 business days2 - 3 business days
    TAS5 - 7 business days5 - 6 business days2 - 3 business days
    ACT3 - 6 business days2 - 4 business days1 - 2 business days
    NT7 - 12 business days7 - 10 business days3 - 4 business days

     

    New Zealand Orders

    We ship to New Zealand, to all addresses, including PO Boxes. Packages shipped to New Zealand are sent through Australia Post with 2 shipping options available.

    • Standard Parcel
    • Express Parcel

    View the table below for shipping time estimates for orders to New Zealand. These estimates are based on Australia Post's recent delivery performance and do not take into account any current disruptions which may affect delivery time.

    CountryStandard ParcelExpress Parcel
    New Zealand7 - 12 business days5 - 8 business days

     

    International Orders

    We ship to most countries worldwide, there may be limitations on the addresses they can be delivered based on each individual country. Orders are shipped by Australia Post, in the rare circumstance that Australia Post can't deliver to the selected country we will attempt to ship with another shipping service.

    View the link below for shipping time estimates. These estimates are based on Australis Post's recent delivery performance and do not take into account any current disruptions which may affect delivery time.

    CLICK HERE For Australia Post International Transit Times.


    If you have any questions, please have a look at the customer service portal where you will find answers to many common questions, or you can reach out to us through the contact us page.

    Scroll to Top