Phipps Electronics

Order within the next 

FREE SHIPPING OVER $199

50,000+ ORDERS

WORLDWIDE SHIPPING

SSL SECURED

ST-Link V2 ST-Link Mini STM In-Circuit Programmer and Debugger for STM8 and STM32 – with Cover

35 people have recently viewed this product!

ST-Link V2 ST-Link Mini STM In-Circuit Programmer and Debugger for STM8 and STM32 – with Cover

Mini ST-Link V2 is a low-cost solution for in-circuit debugging and programming of STM8 and STM32 microcontroller series.

$29.95

Order Within –

Availability: 31 in stock

All stock is located in Australia.

FREE SHIPPING Worldwide on orders $199+

EXPRESS SHIPPING Available.

SKU: PHI1001383

Description:

Mini ST-Link V2 is a low-cost solution for in-circuit debugging and programming of STM8 and STM32 microcontroller series. This device will surely come handy whenever you come across the highly popular STM microcontroller.

It comes in one USB stick protected by an aluminum enclosure with cap and accompanied with a 4-way female-female jumper wire. Its DFU bootloader enable necessary firmware update to support more devices in the future; just unplug/replug USB to kick off the DFU process. It even has dual voltage output (3.3V/5V), for easy debugging/programming. A definite must-have for all programming enthusiasts!

 

Features:

  • Programming supports FLASH ROM, EEPROM, AFR, etc.
  • Debugging run at full-speed, single-stepped, breakpoints, viewing variables and registers, etc.
  • USB interface for direct connection to PC
  • USB 2.0 full-speed-compatible
  • Upgradable firmware
  • Automatic firmware upgrade from official ST-Link software
  • On-board 500mA internal resettable fuse for short circuit protection
  • Dual voltage output (3.3V/5V)
  • Red and blue LED indicator, blinks during communication with the PC
  • 20cm 4-way female-female jumper cable

 

Supported Software:

  • ST-LINK Utility v2.0 (or higher ver.)
  • STVD Version 4.2.1 (or higher ver.)
  • STVP Version 3.2.3 (or higher ver.)
  • IAR EWARM Revision v6.20 (or higher ver.)
  • IAR EWSTM8 Revision v1.30 (or higher ver.)
  • KEIL RVMDK Revision v4.21 (or higher ver.)

 

Supported Devices:

  • All the STM8 devices with SWIM interface
  • All the STM32 devices with SWD interface

 

Specifications:

  • SWD Voltage Range: 1.65V – 3.6V
  • SWIM Voltage Range: 1.65V – 5.5V
  • SWV Support: None
  • Debug Interfaces: 2
  • LED indicator: Dual color LED (Red and Blue)
  • Fuse: 500mA resettable fuse

 

Contents:

  • 1 x ST-Link V2 ST-Link Mini
  • 1x 4-way female-female jumper wire
Weight 0.012 kg
Dimensions 100 × 5 × 60 mm

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “ST-Link V2 ST-Link Mini STM In-Circuit Programmer and Debugger for STM8 and STM32 – with Cover”

Use one of the allowed file type: jpg,png. The max size allowed is : 10 MB.

    Can’t find the information you are looking for? Click Here to Contact Us

    Australian Orders

    We ship Australia-wide to all addresses, including PO Box, Parcel Locker, etc. The following shipping options available are listed below: 

    • Standard Shipping – Free (low cost / small products orders under $35 AUD) – Sent via standard Australia Post stamped mail, this shipping option has no tracking and support other than messages from Phipps Electronics to confirm the package has been dispatched to Australia Post.
    • Parcel Shipping (higher cost / larger products orders over $35 AUD or Postage paid at checkout) – Sent via Australia Post Parcel Service or Courier Service, this shipping option has full tracking.
    • Express Post – Sent via Australia Post Express Service, this shipping option has full tracking.

    View the table below for shipping time estimates for Australian orders. These estimates are based on Australia Post's recent delivery performance and do not take into account any current disruptions which may affect delivery time.

    StateStamped PostageParcel PostExpress Post
    NSWUp to 4 business days2 - 4 business days1 - 2 business days
    VIC3 - 6 business days3 - 5 business days2 - 3 business days
    QLD3 - 6 business days3 - 5 business days2 - 3 business days
    SA4 - 7 business days 4 - 6 business days2 - 3 business days
    WA6 - 12 business days6 - 8 business days2 - 3 business days
    TAS5 - 7 business days5 - 6 business days2 - 3 business days
    ACT3 - 6 business days2 - 4 business days1 - 2 business days
    NT7 - 12 business days7 - 10 business days3 - 4 business days

     

    New Zealand Orders

    We ship to New Zealand, to all addresses, including PO Boxes. Packages shipped to New Zealand are sent through Australia Post with 2 shipping options available.

    • Standard Parcel
    • Express Parcel

    View the table below for shipping time estimates for orders to New Zealand. These estimates are based on Australia Post's recent delivery performance and do not take into account any current disruptions which may affect delivery time.

    CountryStandard ParcelExpress Parcel
    New Zealand7 - 12 business days5 - 8 business days

     

    International Orders

    We ship to most countries worldwide, there may be limitations on the addresses they can be delivered based on each individual country. Orders are shipped by Australia Post, in the rare circumstance that Australia Post can't deliver to the selected country we will attempt to ship with another shipping service.

    View the link below for shipping time estimates. These estimates are based on Australis Post's recent delivery performance and do not take into account any current disruptions which may affect delivery time.

    CLICK HERE For Australia Post International Transit Times.


    If you have any questions, please have a look at the customer service portal where you will find answers to many common questions, or you can reach out to us through the contact us page.

    ST-Link V2 ST-Link Mini STM In-Circuit Programmer and Debugger for STM8 and STM32 – with Cover 2ST-Link V2 ST-Link Mini STM In-Circuit Programmer and Debugger for STM8 and STM32 – with Cover
    $29.95

    Availability: 31 in stock

    Scroll to Top