Menu

0

$0.00

Air Quality Particulate Matter Sensor Module PM 2.5 SDS011

Specifications: Working Voltage: 5V Working Current: 100mA (max.) Sleep Current: 2mA Response Time: 1s Measuring Output: PM2.5 Range: 0.0 – 999.9 ug/m3 Serial Data Output Frequency: 1 time/s Particle Diameter Resolution: < 0.3um Relative Error: 10% Dimensions: 71mm x 70mm x 23mm   Interface Specifications: Pin 1: CTL – Control Pin, Reserved Pin 2: 1um – >... read more

ISD1820 Voice Recorder Module User Guide

INTRODUCTION: The Voice Record Module is based on the ISD1820 and is a multiple‐message record/playback device. It module offers true single‐chip voice recording with no‐volatile storage and playback capability for 8 to 20 seconds. The sample rate can be set as low as 3.2k and allows for a total of 20 seconds of recording. The... read more

PIC K150 ICSP Programmer – PHI1072218

COMPATIBILITY: The PIC K150 ICSP Programmer is compatible with many popular IC’s: 10 SERIES: PIC10F200* PIC10F202* PIC10F204* PIC10F206* PIC10F220* PIC10F222* 12C SERIES: PIC12C508 PIC12C508A PIC12C509 PIC12C509A PIC12C671 PIC12C672 PIC12CE518 PIC12CE519 PIC12CE673 PIC12CE674 12F SERIES: PIC12F508 PIC12F509 PIC12F629 PIC12F635 PIC12F675 PIC12F683 16C SERIES: PIC16C505 PIC16C554 PIC16C558 PIC16C61 PIC16C62 PIC16C62A PIC16C62B PIC16C63 PIC16C63A PIC 16C64 PIC16C64A PIC16C65... read more

XL6009 DC-DC Adjustable Step-up Power Supply Module – PHI1071815

PINOUT: IN+: Positive Input (Regulated or Unregulated) IN-: Negative Input (Ground) OUT+: Positive Output (Regulated) OUT-: Negative Output (Ground)   SPECIFICATIONS: Input Voltage: 3V – 32V DC Output Voltage: 5V – 35V DC Output Current: 4A (Maximum) Effeciency: Upto 94% Load Regulation: 0.5% Voltage Regulation: 0.5% Dimensions: 45mm x 20mm x 14mm (L x W x H)   FEATURES: Adjustable onboard potentiometer for adjustment... read more

DS0138 Digital Oscilloscope with Acrylic Case – PHI1081259

CASE ASSEMBLY: Put the base-plate and the 4 side-parts in the orientation as shown here flat on a table. Insert the 4 long M3x30 bolts from below into the base-plate and fix them loosely with 4 M3-nuts.   Detach the display-PCB of the DSO138 from the motherboard. Grip it at the right long side where... read more