Precision Flush Wire Cutter – 5″ Shear Cutter – Support Documentation
Product Overview:
The 5″ Precision Flush Wire Cutter is an essential tool for electronics enthusiasts, jewellers, and hobbyists. Designed for clean, precise cuts, it is ideal for trimming component leads, cutting soft wires, and working in confined spaces.
Key Features:
- Length: 5 inches (127mm)
- Material: High-carbon steel with heat-treated blades for durability
- Cutting Capacity: Suitable for soft copper and aluminium wires up to 16 AWG (1.29mm)
- Design: Ultra-slim profile with precision-ground cutting edges for flush cuts
- Handle: Ergonomic, non-slip grips with a steel return spring for reduced hand fatigue
- Weight: Approximately 76g
Applications
- Trimming component leads on PCBs
- Cutting soft wires in electronics and jewellery making
- Snipping plastic parts and zip ties
- Model making and crafting
Usage Instructions
- Positioning: Place the cutting edges flush against the component lead or wire to be trimmed.
- Cutting: Squeeze the handles together to make a clean, flush cut.
- Release: Allow the spring-loaded handles to return to the open position.
- Maintenance: Wipe the blades clean after use and apply a light oil to prevent rust.
Best Practices
- Use only on soft metals like copper and aluminium; avoid cutting hard wires or steel to prevent blade damage.
- Store in a dry place to prevent corrosion.
- Regularly inspect the cutting edges for wear and sharpen or replace as necessary.
Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Jagged cuts | Dull blades or improper positioning | Sharpen blades and ensure proper alignment during cutting |
| Handles not returning to open position | Spring mechanism malfunction | Inspect and replace the spring if necessary |
| Rust on blades | Exposure to moisture | Clean and apply rust-preventative oil; store in a dry environment |
Frequently Asked Questions (FAQs)
- Q: Can this cutter be used on steel wire?
- A: No, it is designed for soft metals like copper and aluminium. Using it on steel can damage the blades.
- Q: How do I maintain the cutter?
- A: Clean the blades after use and apply a light oil to prevent rust. Store in a dry place.
- Q: Is the cutter suitable for left-handed users?
- A: Yes, the symmetrical design allows comfortable use for both left and right-handed individuals.