3.5 Inch Raspberry Pi Touch Screen LCD Display Module and Stylus – 320 x 480
The 3.5 inch Raspberry Pi Touch Screen LCD Display Module has been specifically designed to fit the Raspberry Pi development boards with ease.
The screen has a resolution of 320 x 480 and touch screen enabled. The screen is supported by the Raspbian OS and will be up and running with a few lines of code.
- 320 x 480 Resolution
- Supports Raspbian operating system
- Screen Type: TFT
- Interface / Rate: SPI / 32 MhZ
- Touch control chip: XPT2046
- Colour Graduation: 65536
- Backlight: 6 LEDs
- Resolution: 320 x 480
- Dimensions: 78.6mm x 56.2mm
- 1 x 3.5 Inch Raspberry Pi 4, 3 2 LCD 320 x 480 Touch Screen Display Module
- 1 x Stylus / Touch Pen
We ship Australia wide to all addresses, including PO Box, Parcel Locker, etc.
The following shipping options available are listed below:
- Standard Shipping – Free (low cost / small products) – Sent via standard Australia Post stamped mail, 3 – 7 business days delivery depending on location, minimal tracking.
- Standard Shipping – Free (higher cost / larger products) – Sent via Australia Post Parcel Service or Courier Service, depending on location and mailing address, 2 – 5 business days delivery, with full tracking.
- Express Post – $12.00 (Cost may be higher depending on product size) – Sent via Australia Post Express Service, 1 – 2 business days for metro orders, potentially longer for orders outside of metro zones, with full tracking.
Orders outside of metro orders can take 2+ days longer than the estimates stated above.
Shipping costs for international orders vary depending on location and package size, where possible we have kept this to flat rate charges to reduce confusion.
International orders are shipped through Australia Post and Sendle courier service depending on the most economical at the time.
In-person pickup is currently not available. If the order is urgent, please contact us to see what can be arranged.
If you have any questions, please have a look at the customer service portal where you will find answers to many common questions, or you can reach out to us through the contact us page.
If you would like more information regarding placing international orders, please view the faq page under the “Do you accept international orders?” section.
20×4 Character LCD Display Module with LED Backlight – White on Blue
Raspberry Pi 5V 2A Power Supply with On Off Button USB Cable
0.96 Inch Blue OLED Serial Display Module – 128 x 64