Arduino Mega 2560 R3 CH340 Development Board with USB Cable – Compatible
The Arduino Compatible Mega2560 R3 CH340 Development Board is based on the ATmega2560.
The board has 54 input and output pins of which 15 can be used as PWM outputs, 16 analog inputs and UART. The board also features a 16 MHz crystal oscillator and ISCP header.
- Operating voltage: 5V DC
- Input voltage: 6 – 20V DC (7V – 12V recommended)
- USB Controller: CH340G
- Clock: 16 MHz
- Flash memory: 256KB
- SRAM: 8KB
- EEPROM: 4KB
- Digital I/O pins: 54
- Analog pins: 16
- DC current per I/O pin: 40mA
- DC current for 3.3V pin: 50mA
- 1 x Arduino Compatible Mega 2560 R3 CH340 Development Board
- 1 x USB Cable
We ship Australia wide to all addresses, including PO Box, Parcel Locker, etc.
The following shipping options available are listed below:
- Standard Shipping – Free (low cost / small products) – Sent via standard Australia Post stamped mail, 3 – 7 business days delivery depending on location, minimal tracking.
- Standard Shipping – Free (higher cost / larger products) – Sent via Australia Post Parcel Service or Courier Service, depending on location and mailing address, 2 – 5 business days delivery, with full tracking.
- Express Post – $12.00 (Cost may be higher depending on product size) – Sent via Australia Post Express Service, 1 – 2 business days for metro orders, potentially longer for orders outside of metro zones, with full tracking.
Orders outside of metro orders can take 2+ days longer than the estimates stated above.
Shipping costs for international orders vary depending on location and package size, where possible we have kept this to flat rate charges to reduce confusion.
International orders are shipped through Australia Post and Sendle courier service depending on the most economical at the time.
In-person pickup is currently not available. If the order is urgent, please contact us to see what can be arranged.
If you have any questions, please have a look at the customer service portal where you will find answers to many common questions, or you can reach out to us through the contact us page.
If you would like more information regarding placing international orders, please view the faq page under the “Do you accept international orders?” section.
BeagleBone Blue Development Board
Arduino Nano 3.0 Atmel ATmega328 Mini-USB Board with USB Cable – Compatible
BeagleBone Black Wireless Development Board – WiFi and Bluetooth