FTDI 5V USB Breakout Board Module – With Cable
DescriptionThis is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. read more
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.
The pins labelled BLK and GRN correspond to the coloured wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target.
This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working.
This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!). Our Arduino Pro boards and LilyPads use this type of connector.
One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level). This board ship default to 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V.
- Output power: 5V (Can be modified to 3.3V)
- 1x USB-TTL 6 PIN 5V FTDI Module
- 1x USB Cable
Only logged in customers who have purchased this product may leave a review.
We ship Australia wide to all addresses, including PO Box, Parcel Locker, etc.
The following shipping options available are listed below:
- Standard Shipping – Free (low cost / small products) – Sent via standard Australia Post stamped mail, 3 – 7 business days delivery depending on location, minimal tracking.
- Standard Shipping – Free (higher cost / larger products) – Sent via Australia Post Parcel Service or Courier Service, depending on location and mailing address, 2 – 5 business days delivery, with full tracking.
- Express Post – $12.00 (Cost may be higher depending on product size) – Sent via Australia Post Express Service, 1 – 2 business days for metro orders, potentially longer for orders outside of metro zones, with full tracking.
Orders outside of metro orders can take 2+ days longer than the estimates stated above.
Shipping costs for international orders vary depending on location and package size, where possible we have kept this to flat rate charges to reduce confusion.
International orders are shipped through Australia Post and Sendle courier service depending on the most economical at the time.
In-person pickup is currently not available. If the order is urgent, please contact us to see what can be arranged.
If you have any questions, please have a look at the customer service portal where you will find answers to many common questions, or you can reach out to us through the contact us page.
If you would like more information regarding placing international orders, please view the faq page under the “Do you accept international orders?” section.