Obstacle Avoiding Ultrasonic DIY 2WD Arduino Robot Kit
Assembly Instructions
Ultrasonic Sensor Installation
The above instructions refer to a sensor holder that is no longer included in these kits, below you will find instructions on how to install the sensor with the supplied parts in the current kits.
Video Instructions (from electronic Guru)
Below is an assembly video guide from popular YouTuber electronic Guru.
Arduino obstacle avoiding Robot car | Arduino ultrasonic sensor and L298N based self driving car
2WD-Robot Car Instructions (Stephen Edwards version)
A popular instruction manual created by Stephen Edwards (includes Assembly and Firmware). Note that there may be several revisions of the hardware. Some mounting options, such as screws, spacers, and double-sided tape mounting pads, may be different.
2WD-Robot Car Firmware
Below is a downloadable Arduino Firmware for this 2WD Ultrasonic Robot Car.
Arduino-obstacle-avoidance-car-master