LilyPad ATmega328P Arduino Compatible Development Board
DescriptionThe LilyPad ATmega328P Arduino Compatible Development Board is an Arduino-programmed microcontroller designed to be easily integrated into e-textiles and wearable projects. It offers the same functionality you find in other Arduino boards, in a lightweight, round package designed to minimise getting caught on things and profile, with wide tabs that can be sewn down and connected with conductive thread. read more
The LilyPad ATmega328P Arduino Compatible Development Board is an Arduino-programmed microcontroller designed to be easily integrated into e-textiles and wearable projects. It offers the same functionality you find in other Arduino boards, in a lightweight, round package designed to minimise getting caught on things and profile, with wide tabs that can be sewn down and connected with conductive thread.
The LilyPad Arduino consists of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible.
This board will run from 2V to 5V and offers large pin-out holes that make it easy to sew and connect. Each of these pins, with the exception of (+) and (-), can control an attached input or output device (like a light, motor, or switch).
- Processor: ATmega328P
- Input voltage: 2 – 5V DC
- Dimensions: 50mm x 50mm x 1mm
- 1 x Lilypad ATmega328P Arduino Compatible Development Board
We ship Australia wide to all addresses, including PO Box, Parcel Locker, etc.
The following shipping options available are listed below:
- Standard Shipping – Free (low cost / small products) – Sent via standard Australia Post stamped mail, 3 – 7 business days delivery depending on location, minimal tracking.
- Standard Shipping – Free (higher cost / larger products) – Sent via Australia Post Parcel Service or Courier Service, depending on location and mailing address, 2 – 5 business days delivery, with full tracking.
- Express Post – $12.00 (Cost may be higher depending on product size) – Sent via Australia Post Express Service, 1 – 2 business days for metro orders, potentially longer for orders outside of metro zones, with full tracking.
Orders outside of metro orders can take 2+ days longer than the estimates stated above.
Shipping costs for international orders vary depending on location and package size, where possible we have kept this to flat rate charges to reduce confusion.
International orders are shipped through Australia Post and Sendle courier service depending on the most economical at the time.
In-person pickup is currently not available. If the order is urgent, please contact us to see what can be arranged.
If you have any questions, please have a look at the customer service portal where you will find answers to many common questions, or you can reach out to us through the contact us page.
If you would like more information regarding placing international orders, please view the faq page under the “Do you accept international orders?” section.
Capacitive Soil Moisture Detection Sensor Module
BeagleBone Black Wireless Development Board – WiFi and Bluetooth
Arduino Nano 3.0 Atmel ATmega168 Mini-USB Board – Compatible