TCS3200 Colour Sensor Module
DescriptionThe TCS3200 is a colour sensor has an array of photodiodes that detect colour, the photodiodes are arranged in groups of four with red, green, or blue filters on three of the photodiodes and no filter on the fourth. read more
The TCS3200 is a colour sensor has an array of photodiodes that detect colour, the photodiodes are arranged in groups of four with red, green, or blue filters on three of the photodiodes and no filter on the fourth. This allows the sensor to measure the amount of red, green, blue, and white light that hits the sensor.
This module incorporates four white LEDs to illuminate an object of which you wish to measure the colour of. The white light from these LEDs hits your test object and reflects back to the module’s sensor, which then measures the amount of red, green, blue, and white light that was reflected.
Being photosensitive, this module is affected by background light, to get the best results, use in a dark place.
- Supply voltage: 2.7 – 5.5v
- Logic level: Same as Vcc
- Dimensions: 32mm (L) * 24.7mm (W)
- 1x TCS3200 Colour Sensor Module
Only logged in customers who have purchased this product may leave a review.
We ship Australia wide to all addresses, including PO Box, Parcel Locker, etc.
The following shipping options available are listed below:
- Standard Shipping – Free (low cost / small products) – Sent via standard Australia Post stamped mail, 3 – 7 business days delivery depending on location, minimal tracking.
- Standard Shipping – Free (higher cost / larger products) – Sent via Australia Post Parcel Service or Courier Service, depending on location and mailing address, 2 – 5 business days delivery, with full tracking.
- Express Post – $12.00 (Cost may be higher depending on product size) – Sent via Australia Post Express Service, 1 – 2 business days for metro orders, potentially longer for orders outside of metro zones, with full tracking.
Orders outside of metro orders can take 2+ days longer than the estimates stated above.
Shipping costs for international orders vary depending on location and package size, where possible we have kept this to flat rate charges to reduce confusion.
International orders are shipped through Australia Post and Sendle courier service depending on the most economical at the time.
In-person pickup is currently not available. If the order is urgent, please contact us to see what can be arranged.
If you have any questions, please have a look at the customer service portal where you will find answers to many common questions, or you can reach out to us through the contact us page.
If you would like more information regarding placing international orders, please view the faq page under the “Do you accept international orders?” section.
Linear Slide Potentiometer 10k Module – Dual Output
$10.95 + Add to cart
Digital LCD Indoor Temperature Humidity Meter Thermometer Hygrometer
$9.95 + Add to cart
IR Flame Detection Sensor Module
$4.95 + Add to cart
IR Infrared Obstacle Avoidance Sensor – E18-D80NK
$11.95 + Add to cart